|
|
|
|
|
|
|
|
|
|
|
Shoulder Screw 5/16 Oliver 625 Soc. Screw 5/16 - 18 x 1/2 Oliver Divider / Rounder FME # 2P4766
|
Rimless USDA Sheet Pan - 18" x 26" overall dimensions - 12 gauge aluminum hardened aluminum alloy - Rimless design, no bead to collect debris - USDA and NSF approved construction - Weight: 3.75 Lbs
|
20 cups per pan - Cup top-in is 3-9/16" by 3-15/16" - Cup depth is 1-1/2" - Includes Teflon coating
|
|
|
|
|
|
|
|
|
|
|
|
|
Drip Guide. Baxter BXPR2 / Hobart HPR2 Drip Guide. FME# 1P3063
|
Door Sweep: Bottom BXPR2 / HPR2 28-3/4" L x 1-1/4" W (Similar to 9P1980) Bottom Door Sweep Baxter Proofer / Hobart Proofer
FMBE # 9P1963
|
High Limit Temp 1x1 / 624 / 724 / 620 / 626 Temp. Limiting Control Revent Rack Ovens FME # 6P2636
|
|
|
|
|
|
|
|
|
|
|
|
|
Gasket: Door BXPR2 / HPR2 1 Closed piece Magnetic Door Gasket (1 door) Baxter Proofer / Hobart Proofer FME # 9P1962
|
Lever-Releasing: Oliver 625-S Base Replacement Section Oliver Divider / Rounder 625-S -2P3800
|
3 Pole Contactor, Control/Service Entrance, Thermistor, and Humidty Sensor Section Hobart HRP/HPC Proofer FME# 6P4570
|
|
|
|
|
|
|
|
|
|
|
|
|
Kit, Pin Cylinder: Oliver 619-24RA Hydraulic Assembly Section Kit Contains the Following: CYLINDER-THR'D HYD (PER PRINT) part 244 GAUGE-FEELER INSTRUCTION SHT-LID PIN ADJUST BUSHING-DRILL 7/8X5/8X1-3/4LG PIN-LOCKING W/SPRING ASSIST part 238 WASHER-SPECIAL SPRING-COMP.845OD X.085W X1.75 Oliver Divider 619-24RA
FME# 1P3242
|
Gas Valve: 1/2 in Lucks G1826 Gas Combination 120v Basotrol Lucks Fryer FME # 3P1727
|
Power Supply Board: Retar PC/HPC / HRP100 PC Green Board - (Retarder Proofer Only) Baxter & Hobart Retarder Proofer FME # 6P4577
|
|
|
|
|
|
|
|
|
Frequently Asked Questions: Will This Speed Up My Prep Time? - Stiff brushes will remove all seeds, egg wash and baked on dough - Much faster than hand-wiping with much better results Can I Clean Pans Thicker Than 1 Inch? The maximum pan thickness is 1 inch only, which is the thickness of most boards, bun and sheet pans and fluted baguettes pans Will This Remove Grease From My Pans? This cleaner works only for dry pans, with baked-on seeds, dough, or egg wash Greasy pans will only smear, this cleaner is not to be used with grease-laden pans What Is The Largest Pan This Will Clean? This will accept pans up to 24” tall, by any length Will This Scratch My Pans or Remove Coatings? These synthetic brushes apply a soft, but intensive working, and are not so stiff as to scratch soft aluminum sheet pans Theses brushes will not scratch or remove Teflon coating, silicone glaze coating or Duracote finishes. How Long Will The Brushes Last? The brushes are very high quality and will last for years. The only damage to the brushes we have seen…is if there are sharp or jagged edges on the pans, this will cause the first set of brushes to wear faster. Replacement cost, per brush, is $190.00 each How Easy Is It To Clean? As shown in the video, a pressure washer can be used, but only in a downward motion as shown in the video as the motor and controls, mounted in the top are not washdown electrics What Are The Overall Dimensions Of The Cleaner? Overall dimensions are 28” wide by 56” long by 49” high What Are The Power Requirements? 208 VAC, 3 phase, 8 amps electric requirements 6-foot cord is included, male plug to be provided by the purchaser Once We Place The Order, How Long To Receive? Currently, we are running 6 weeks to ship, from date of order What Is The Current Price? $16,900.00 FOB Factory, Irwindale, CA Shipping weight is 580 pounds, class 100, FOB Irwindale, CA 91702
|
|